The status LED on the robot (during charging/docked) is far too bright

The status LED on the robot (during charging/docked) is far too bright, lighting up the entire room like a nightlight.
The base station LEDs (charging indicator, etc.) are equally intense and disruptive in dark environments.

Request: Please add an option in the Dreamehome App to adjust or fully disable the brightness of these LEDs. Ideal would be:

A slider for brightness (e.g., 0-100%, with 0% = off).
Separate toggles for robot status LED and base station lights.
Located under Device Settings > Display/Lights or Advanced Options.

This is a common complaint in forums (e.g., roboter-forum.com, Reddit r/Dreame_Tech) – many users resort to taping over the LEDs, which isn't ideal.​
A simple firmware/App update could fix this and greatly improve nighttime usability.

Thank you for considering!

ÜbersetzenOriginal anzeigen

Hello,

thank you for your valuable feedback regarding the brightness of the device status LED and base station lights. We have carefully documented your suggestion and forwarded it to our product and R&D teams. Your input will be considered in our evaluations as we work to optimize related features in future firmware or app updates.

Currently, the Aqua10 series supports turning off the robot's LDS ring light. You can configure it as follows:

- To turn off the light during cleaning: Go to [Settings] > [Auxiliary Settings] > [Ring Indicator Always On], and toggle the switch off. The indicator light will turn off during cleaning.
- To turn off the light during both cleaning and charging: In addition to the above setting, enable [Do Not Disturb Mode] via [Settings] > [Auxiliary Settings] > [Do Not Disturb Mode]. During the DND period, the ring light will also remain off while charging.

We truly appreciate your feedback and will continue to evaluate ways to improve the user experience. Please feel free to share more of your thoughts and experiences with us.